skip to Main Content
Everything you need to rout underfloor heating quickly & easily.The right diamond tool for your job.Knowledge and expertise in diamond tools, floor heating and proper dust extraction.

Welcome klant, what can we help you with today?

DSCN2245_isolated_web-1

Congratulations klant! You are the happy owner of a D5.5 completely self-propelled underfloor heating milling machine with serial number (onbekend).

This machine is extremely powerful, comfortable and built for your convenience. If something does not run quite as it should, you will find useful instructions on this service page so that you can quickly resume milling.

We also give you a number of useful tips for the maintenance and use of your underfloor heating milling machine and you will find an overview of products that you can order to ensure that your machine functions optimally.

The instructions in our service videos are step-by-step and clearly formulated. Do you still have a question or would you rather speak to one of our enthusiastic colleagues? Then click on the links below.

The right tools for your D5.5

Diamond is your best friend.

With these D5.5 floor heating milling machines from FlooriQ you have bought one of the very best milling machines. And of course we don’t just sell a milling blade with that. We therefore advise to only use the underfloor heating machines in combination with Floor IQ approved diamond milling blades.

 

Our diamond milling blades are made with the very best raw materials and highly critically assessed diamonds. The milling blades are developed by our own professionals. We also carry out research and product development of our milling blades in-house. This keeps our lines short and allows us to switch quickly. No diamond milling blade leaves our house without the OSA quality mark. You are always assured of quality and safety, so that you achieve a top result with your machine.

 

 

Warning!

Do you perform maintenance on your machine? Or do you perform actions other than milling? Always make sure that the plug is removed from the socket so that there is no longer any voltage on the machine and that the plug remains in your field of vision.

Products for your machine

Useful products when using your milling machine.

Diamant freesblad

Diamond tools

Our diamond milling blades are developed by our own professionals and meet the high safety requirements of the OSA.

View the products
F1 vervangingsset VLFR-D4.0

Accessories & parts

Extras for improving, supplementing and repairing your machines.

View the products

Take care!

Your machine will continue to work perfectly if you maintain it perfectly. We are happy to help you with a number of tips to keep your machine in optimal form.

  • Do you perform maintenance on your machine? or other actions than milling? Make sure that the plug is removed and that it remains in your field of vision at all times.
  • Make sure you use the right tuck point for the right surface. If used incorrectly, the tuck point will wear out much faster and could potentially damage your machine.
  • Note that the ammeter reads a maximum of 11 amps. Does the ammeter read more than 11 amps? Then check the used tuck point. More than 11 amps can cause overload and damage to the machine.
  • After every 10 to 12 milling jobs, remove the saw guard and coupling cover and remove dust and dirt. This prevents any problems with the coupling and the saw spindle or the toothed belt due to the accumulation of dust and dirt.

Exploded view

Are you looking for a specific part?
In this schematic representation you can see exactly where which part is located.
Click on an image to enlarge.

Ask Leendert-Jan or Remco

Still have a question? Or are you having trouble with our instructional videos? Our account managers can tell you everything about Floor iQ tools. They can also make a repair appointment if necessary.